PTC - Công ty TNHH Công nghệ Phước Thịnh
K-Array Firenze-KH8

K-Array Firenze-KH8

Liên hệ báo giá
  • Thương hiệu: K-Array – Ý

  • Sản xuất: Ý

  • Loa 8 x 8″ / 8 x 4″ / 4 x 1.4″

  • Ampli class D / 8 x 2000W @ 4Ω

  • Tần số: 60Hz – 18kHz

  • Max SPL: 145dB

  • HxWxD: 50 x 117 x 20cm – 75.2kg

  • Bảo hành: 12 tháng

Chia sẻ:

General

Type:

Active line array element

Transducers:

8x 8″ Neodymium magnet woofer with 2.5″ voice coil
8x 4″ Neodymium magnet drivers with 1.5″ voice coil
4x Neodymium magnet compression driver with 1.5″ voice coil

Frequency Response:

70 Hz – 18 kHz (-3 dB)(1)

Max SPL:

145 dB peak(2)

Remote Control:

Remote control with dedicated PC software via Ethernet

Coverage:

Horizontal: 120°
Vertical: digitally adjustable with Electronic Beam Steering

Connectors:

Analog, AES3 and Remote control:
Easy-grip metal locking LK25 connector (MIL C 5015 and VG95234 spec.)

Handling and Finishes

Dimensions (W x H x D):

1170 x 500 x 226 mm (46.1 x 19.7 x 8.89 in)

Weight:

75,2 kg (159.84 lb)

Material:

Stainless Steel

Colors:

Black, Custom RAL

Amplifier

Amp Module:

4-ch., switch mode, class D

Output Power:

8x 2000 W @ 4 Ω 1% THD+N

Power Consumption:

1250 W @ 4 Ω load, Pink noise 1/8 rated power

Protections:

Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection,
Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection

Operating Range:

100-240V AC, 50-60 Hz with PFC

Mains Connector:

powerCON True

Digital Signal Processor

Built-in DSP:

Input gain, delay up to 2 s,
Full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
FIR filter for digital beam steering
Level and Temperature remote monitoring

Regulations

IP Rating:

Speaker Box: IP45 / Electronics: IP65

Thông số kỹ thuật

SKUFirenze-KH8
Bảo hành12 tháng
Sản phẩm tương tự