PTC - Công ty TNHH Công nghệ Phước Thịnh
 K-Array Firenze-KH7

K-Array Firenze-KH7

Liên hệ báo giá
  • Thương hiệu: K-Array – Ý

  • Sản xuất: Ý

  • Loa 4 x 12″

  • Ampli class D / 4 x 2000W @ 4Ω

  • Tần số: 60Hz – 18kHz

  • Max SPL: 141dB

  • HxWxD: 35 x 117 x 20cm – 52kg

  • Bảo hành: 12 tháng

Chia sẻ:

General

Type:

Active line array element

Transducers:

4x Coaxial 12″ Neodymiun magnet driver with 3″ voice coil
+ compression driver with 2″ voice coil

Frequency Response:

90 Hz – 18 kHz (-6 dB)(1)

Max SPL:

141 dB peak(2)

Rated Power:

1200 W

Remote Control:

Remote control with dedicated PC software via Ethernet

Coverage:

100° H / 30° V or 30° H / 100° V + digital adjustment with Electronic Beam Steering

Connectors:

Analog:
1x XLR (bal) input signal
1x XLR (bal) parallel output
Digital:
1x XLR AES3 input

Handling and Finishes

Dimensions (W x H x D):

1170 x 350 x 200 mm (46 x 13.8 x 7.9 in)

Weight:

52 kg (114.64 lb)

Material:

Stainless Steel

Colors:

Black, Custom RAL

Amplifier

Amp Module:

4-ch., switch mode, class D

Output Power:

4x 2000 W @ 4 Ω 1% THD+N

Power Consumption:

600 W @ 8 Ω load, Pink noise 1/8 rated power

Protections:

Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection,
Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection

Operating Range:

100-240V AC, 50-60 Hz with PFC

Mains Connector:

powerCON True with link inlet

Digital Signal Processor

Built-in DSP:

Input gain, delay up to 2 s,
Full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
FIR filter for digital beam steering
Level and Temperature remote monitoring

Regulations

IP Rating:

IP53

Thông số kỹ thuật

SKUFirenze-KH7
Bảo hành12 tháng
Sản phẩm tương tự